FDM 3D Printers: UltiMaker S7
Ultimaker S7Ultimaker S7 BackUltimaker S7 Pro BundleUltimaker S7 Pro Bundle Front Right SpoolsUltimaker S7 Pro Bundle Rear
Find out more about FDM 3D Printers

UltiMaker S7

Upgrade to the best UltiMaker yet with the S7, which refines the UltiMaker experience for its most reliable and easy-to-use machine to date. The machine draws on UltiMaker’s long experience manufacturing 3D printers, adding the most requested features from the UltiMaker user base. The S7 combines a large build volume with an integrated air manager to improve environmental control and to better regulate the temperature of the build chamber. A flexible PEI coated build plate makes it easier than ever to remove prints, while new sensors and placement pins make it simple to put the build plate back in place. With true set and forget technology, this machine produces excellent parts without the hassle of other machines.

Key features

  • New inductive sensor improves automatic bed levelling, printing a perfect first layer, every time
  • Maximum build volume: 330 x 240 x 300mm
  • Integrated air manager filters 95% of ultrafine particles from the air, while fully enclosing the build chamber for extra safety and improved print quality
  • Flexible build plate, a new build plate sensor and placement pins make removing finished parts and starting a new build faster than ever
  • An upgraded camera enables you to monitor the status of each job
  • New inductive print head sensor is more accurate, improving automatic calibration
  • Sensors pause the print and alert you if the material runs out or if there is a blockage

Automatic material handling

Upgrade to the UltiMaker S7 Pro Bundle to enjoy all the benefits of the standard S7, but with an added Material Station. This enables you to run the machine for longer than normal by fully automating material handling. The Material Station has space for six spools, enabling you to employ almost any combination of polymer and abrasive composites in your prints.

Each spool of material is kept at 25% below relative humidity and is pre-fed, ready to be used at a moment’s notice. An NFC reader identifies each spool and provides material information to UltiMaker Cura and UltiMaker Digital Factory software for ease of configuration and traceability.



    330 x 240 x 300 mm


    495 x 585 x 800 mm; 29.1 kg


    Dual extrusion print head with auto-nozzle lifting system and swappable print cores


    6.9, 6.9, 2.5 micron


    < 24 mm³/s


    PEI coated flexible build plate (20 - 140 °C)

    Get a quote and sample part   ↓

    Sample part requestQuote requestSample part & quote request

    Sign up for our newsletter? YESNO