Metal 3D Printers: Xact Metal XM300G
Xact Metal 300G
Find out more about Metal 3D Printers

Xact Metal XM300G

Giving companies the speed and cost savings that metal additive manufacturing offers, for a fraction of the price of the competition is at the heart of what Xact Metal does. The new XM300G features Xact Metal’s largest build volume yet, using its most flexible platform so far. The standard build volume of 300 x 300 x 350mm can be upgraded to 300 x 300 x 450mm if you need to produce even larger parts, or several smaller parts simultaneously. This powder-bed fusion machine can be configured with single, dual or quad 400W or 700W lasers depending on your needs featuring overlapping print zones and an interchangeable build platform, resulting in faster print speeds.

Key features

  • Large build volume helps increase production time, with an even larger version available if needed
  • Removable, interchangeable build platform reduces waits between prints
  • Depending on your production needs, you can choose from 400W or 700W single lasers (on the XM300G), dual lasers (with the XM300G2) or quad lasers (on the XM300G4)
  • Features an industrial-quality galvanometer with dynamic spot size
  • Speeds up production with 100% overlapping print zones
  • Open material platform gives you choice rather than locking you into a specific vendor’s powder
  • Easily removable and interchangeable build platform
  • All the benefits of metal powder bed fusion additive manufacturing at a fraction of the cost of competitor’s machines

Designed for your needs

With six different fibre laser configurations and two build volume sizes to choose from, the XM300G is flexible enough to meet your production requirements. Speak to us about the types of metal parts you want to produce, and we will guide you through all the different options and recommend a machine that meets your needs and budget.

Open material platform

The XM300G arrives with parameters set up for the most popular metal powders, such as stainless steel, titanium, aluminium and bronze. But if you have a specialist material you want to use, it is possible to configure the machine to use any metal powder, giving you complete manufacturing flexibility.



    300 x 300 x 350 mm (upgradable to 300 x 300 x 450mm)


    2019 x 845 x 2390 mm


    726 kgs (XM300G), 816 kgs (XM300G2), 907 kgs (XM300G4)


    11.5 cc/hr (400W, Single laser)


    21.3 m/sec


    20 up to 100 μm


    24-inch touchscreen


A selection of metal powders are available that are ready to use.

    Get a quote and sample part   ↓

    Sample part requestQuote requestSample part & quote request

    Sign up for our newsletter? YESNO