FDM 3D Printers: Stratasys F190CR
Find out more about FDM 3D Printers
Stratasys F190CR
Print stronger and stiffer parts with incredible accuracy using the Stratasys F190CR, part of the F123CR series. Supporting two materials that contain carbon fibre, ABS-CF10 and FDM Nylon-CF10, this hardened, composite-ready system is ideal for producing functional prototypes or jigs and fixtures. Built using the same reliable platform that powers other products in the F123 series, the machine will speed up production times so you can meet your deadlines, saving money along the way. High-strength composite parts manufactured on this machine can be used to replace components traditionally made from metal. You can also deploy its use strategically to supplement your existing manufacturing setup when speed, strength and repeatability are important.
Key features
- Manufacture production-ready parts with the extra strength and stiffness that carbon fibre materials offer.
- A build volume of 305 x 254 x 305mm and a heated build chamber let you make taller, solid parts.
- Based on the Stratasys F123 FDM platform that has been proven in tests to have 99% uptime and 99%-dimensional repeatability performance.
- Make parts faster than when using traditional machining, at a lower cost.
- Arrives ready for the office or shop floor. No extra ventilation is needed.
- Soluble support materials mean the support can be removed easily without causing any marring for a better part finish.
Strength of carbon fibre
FDM Nylon-CF10 material combines a blended nylon polymer with 10% chopped carbon fibre, which enhances the material’s strength and rigidity. ABS-CF10 combines acrylonitrile butadiene styrene (ABS) with 10% of carbon fibre, helping to produce parts that are 50% stiffer and 15% stronger than when using the standard ABS material.
No specialist training
Thanks to a set of innovative technologies, there is no requirement to have a specialist technician to operate this machine. GrabCAD Print software makes it easy to use and monitor the machine with a minimal amount of training, while an inbuilt camera lets you monitor jobs from wherever you are in the world. Support for the MTConnect protocol helps you integrate this machine with the rest of your industry 4.0 smart factory.
SIMILAR PRINTERS
SPECIFICATION
-
BUILD ENVELOPE
305 mm x 254 mm x 305 mm
-
SYSTEM SIZE
1626 x 864 x 711 mm; 227 Kg
-
ACHIEVABLE ACCURACY
Within an accuracy of +/- .200 mm, or +/- .002 mm/mm, whichever is greater
-
WIRELESS NETWORK CONNECTIVITY
802.11n, g, or b
-
WIRED NETWORK CONNECTIVITY
Ethernet protocol, RJ45 connector
-
SOFTWARE
GrabCAD Print
MATERIALS
The machine has two material spool bays. One for model, one for support, located in a drawer on the front of the unit
