Search
×
UltiMaker makes 3D printing simple and straightforward with this entry-level FDM system. For those that are getting started on their 3D printing journey or that need an easy-to-use machine for small, simple parts, this printer is ideal. It is also perfect for use in schools to teach the next generation of engineers about additive technologies. To get started, you simply unbox the unit and connect three components in a matter of minutes. With over six million prints produced using UltiMaker architecture so far, this ecosystem is proven to print day and night, with less than 20 minutes of maintenance needed every month.
Over 20 materials are supported, with many materials manufactured in-house by UltiMaker itself. Others are provided by third parties such as BASF and Jabil. All can be employed easily using the downloadable profiles on the UltiMaker Marketplace that provide all the parameters you need to begin making parts.
The standard UltiMaker 2+ Connect is partially open, but it can be made fully enclosed by adding an Air Manager, available separately or as part of a bundle. This also contains an EPA filter that removes up to 95% of ultrafine particles (UPFs) with the assistance of a low noise, brushless fan.
BUILD ENVELOPE
223 x 220 x 205 mm
SYSTEM SIZE
342 x 460 x 580 mm; 10.3 kg
PRINT HEAD
Single extrusion with swappable nozzles
XYZ RESOLUTION
2.5, 12.5, 5 micron
BUILD SPEED
< 24 mm³/s
BUILD PLATE
Heated glass build plate (20 - 110 °C)