Search

×

Stratasys to Offer SAF Technology for Production-Scale 3D Printing

IMPORTANT NEWS
TO REGISTER FOR THE STRATASYS VIRTUAL LAUNCH EVENT … 3 NEW PRINTERS, 3 NEW TECHNOLOGIES… CLICK HERE

 

SAF (Selective Absorption Fusion) technology will power new H Series 3D printers as Stratasys zeroes in on growing market for 3D-printed mass production parts.

Ufpart Saf Service 04 300dpi CmykSAF is a new industrial-grade additive manufacturing technology that delivers production level throughput for end-use parts. Representing the culmination of more than 10 years of research and development, SAF-based 3D printers can deliver a competitive cost per part at production level throughput and with the part quality, consistency and reliability that ensures satisfaction and high production yield.

The SAF technology uses a counter-rotating roller to coat powder layers onto a print bed and prints absorber fluid to image the part layers.  The imaged layers are fused by passing an IR lamp over the entire span of the print bed. SAF technology executes these key process steps in the same direction across the print bed to provide a uniform thermal experience – and therefore part consistency – for all printed parts regardless of their placement in the build.

Ufpart Saf Pa11 13 300dpi CmykConsistent and Efficient Powder Management

SAF technology’s innovative Big Wave™ powder management system ensures the necessary powder is always distributed across the whole print bed, maintaining a large, thermally stable wave of powder. Any overflow powder is quickly recirculated, minimizing powder thermal exposure and reducing powder aging. The result is less fresh powder required and lower operational costs.

UfpartEfficient Energy Absorption Fluid with Industrial Print Heads

SAF technology is used to selectively jet high energy-absorption HAF™ fluid onto areas of a layer of powder-form material in just one full-width pass. Industrial piezo-electric print heads jet single or multiple drops of the fluid to produce either fine detail or large areas, without compromising throughput. The technology supports unique, high-specialty, functional fluids to process a broad range of powders. Infrared energy is radiated to fuse the selected areas and the underlying particles. Tight thermal control avoids warping, quality fall-out, and reduces peak temperatures required in the bed, making SAF technology ideal for production.

Saf Pa11 25 300dpi Cmyk“3D printing is increasingly transforming production in industries around the world as companies seek to move with more agility and efficiency, which is why we have put production parts at the heart of our business strategy,” said Omer Krieger, Stratasys’ executive vice president of product strategy and corporate development. “SAF technology represents a significant innovation that opens up new opportunities to address applications in industries such as automotive, consumer goods and electronics, and industrial equipment. As a result, we will enable a shift of many applications from traditional manufacturing and also enable the creation of products that can only be produced additively.”

Saf Pa11 24 300dpi CmykAccording to an internal Stratasys market analysis, manufacturing applications show the most potential for significant growth in the 3D printing industry, reaching approximately $25 billion by 2025. In fact, CONTEXT estimates that polymer powder bed technology-based printer revenues are set to see a compounded growth rate of 21% per year from 2020 to 2024. Together with FDM® and Origin P3-based 3D printers, Stratasys is well-positioned to serve the majority of manufacturing applications, from tooling to end-use parts across multiple industries.

Saf Pa11 14 300dpi CmykStratasys is developing the SAF-powered H Series Production Platform to expand the applications it can serve across multiple industries. The technology is inherently able to process a wide variety of materials, such as polyamides and elastomers, and Stratasys’ relationships with leading chemical companies will help it bring new materials to market quickly.

More information about SAF technology is available online. Stratasys will host a live conversation on LinkedIn and Facebook on April 7, during which Stratasys leaders and Professor Neil Hopkinson, director of technology at Xaar 3D and original inventor of the technology behind SAF, will share more information and take questions about the technology, its development history, and its role in the Stratasys portfolio, and take questions.

 

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

 

RETURN TO NEWS

FIND THIS NEWS INTERESTING? WHY NOT TALK TO OUR 3D PRINTING EXPERTS TO DISCUSS IN MORE DETAIL

    CONTACT US   ↓

      YOUR DETAILS:

    YOUR COMMENTS:

    Want a free sample part? YESNO
    Sign up for our Newsletter?

    ×

      SIGN UP TO OUR NEWSLETTER   ↓



      ×

        CONTACT US   ↓

          YOUR DETAILS:

        YOUR COMMENTS:

        Want a free sample part? YESNO
        Sign up for our Newsletter?

        ×